Kinetics of glass transition,crystallization and soft magnetic properties of the Fe76.5Nb3B20Cu0.5 glassy alloys

Journal of Thermal Analysis and Calorimetry - Differential scanning calorimetry was used to investigate the non-isothermal crystallization kinetics of the Fe76.5Nb3B20Cu0.5 glassy alloys. The...     

Thermo-oxidative degradation of Nylon 1010 films: Colorimetric evaluation and its correlation with material properties

The thermo-oxidative aging behaviors of Nylon 1010 films were studied by various analytical methods, such as measuring the chromaticity, relative viscosity, carbonyl index, UV absorbance at 280 nm and elongation at break of the aged films. The thermo-oxidative aging plots of the results obtained via these various methods at different temperatures are subjected to the time-temperature superposition analysis, which are found to be well superposed. The b^* values are used as X axis and the other results, i.e., relative viscosity, carbonyl index, UV absorbance at 280 nm and elongation at break, are used as Y axis, respectively. The relationship between the b^* values and the other results is obtained, from which we can derive the changes of physical and chemical properties at different b^* values. Since the b^* values can be quickly determined by using a portable spectrophotometer, the on-line evaluation of the thermo-oxidative aging of Nylon 1010 can be realized.     

Six-step synthesis of Leonurine and toxicity study on zebrafish

Leonurine (1), an important ingredient in leonurus sibiricus L., can be used for some gynecological disease. We have developed a concise and efficient synthetic route of Leonurine, which can be optimized for mass production. Commercially available compound 6 and 2,3-dihydrofuran (7) were used as starting materials. And the toxicity study on zebrafish shows that Leonurine would promote the hatching of zebrafish embryos at low concentration and result in acute death or chronic lethal toxicity at high concentration.     

Understanding the thermal stability of human serum proteins with the related near-infrared spectral variables selected by Monte Carlo-uninformative variable elimination

Understanding the thermal stability of the proteins in human serum is essential since human serum is the important source of pharmaceutical proteins. Near-infrared (NIR) spectroscopy was applied to the investigation of thermal changes in secondary structure and hydration of human serum proteins. However, as a multicomponent system, the overlap of the broad NIR bands makes the structural analysis very difficult directly using the spectra of serum samples. Therefore, continuous wavelet transform (CWT) was used to improve the resolution of NIR spectra, and Monte Carlo-uninformative variable elimination (MC-UVE) method was applied to the selection of the variables associated with the proteins for the structural analysis. The variables (5956, 5867, 5815, 5747, 4525, 4401, 4359 and 4328 cm^-1) related to protein secondary structures and those (7074, 6951, 6827 and 6700 cm^-1) connected with water species were selected. Then, the thermal stability was analyzed through the intensity variations of the selected variables with temperature from 30 ℃ to 80 ℃. It was found that the variation of the spectral variables related to both α-helix and β-sheetchanges apparently around 60 ℃, indicating the beginning of the thermal denaturation and the transition from α-helix to β-sheet. Moreover, an obvious change was found around 60 ℃ for the content of the water specie S₃, i.e., the water cluster containing three hydrogen bonds. The result demonstrates that MC-UVE can identify the protein-related NIR spectral variables, and the water species may be a marker for investigation of the structural change of proteins in biochemical systems.     

Experimental Study on Purification of Diesel Particulate Matter by Non-thermal Plasma Technology

In order to investigate the effects of non-thermal plasma (NTP) on diesel particulate matter (PM), an engine test bench was built up. An engine exhaust particle sizer (EEPS) was introduced to analyze the emission concentration and size distribution of PM and a thermo-gravimetric analyzer was used to analyze the effects of NTP on the composition of the particulate matter in the exhaust gas. The results show that the size distribution interval of the particle mass concentration falls behind that of the quantity concentration under various loads. When the diesel engine operating speed is 2400 rpm and the load is 25%, after NTP, the proportions of the nucleation mode particles and the accumulative mode particles exhibit a small fluctuation while the proportion of ultrafine particles decreases by 10% due to their large quantity concentration. Under the dual effect of DPF and NTP, the particle quantity concentration decreases by 98%. In order to investigate the effect of NTP on the composition of the PM, a thermo-gravimetric analysis of the particles obtained before and after NTP was carried out. The results show that the proportion of volatile matter falls by 16.05% and solid carbon accounts for an increase of 7.29%. NTP has the ability to improve reduction activity of particles and make particles easier to be oxidized at a lower temperature.     

Effect of cationic surfactant cetyltrimethylammonium bromide on the enzymatic hydrolysis of cellulose

Effect of cationic surfactants alkyltrimethylammonium bromide (C_nTAB) with varied alkyl chain lengths on the enzymatic hydrolysis of Avicel and the surface charge of cellulase was investigated. Enzymatic hydrolysis of Avicel increased linearly from 42.1 to 61.4 % with the increase of the concentration of cetyltrimethylammonium bromide (C₁₆TAB) logarithmically from 0.0001 to 0.01 mM, and reached a maximum value at the concentration of 0.01–0.03 mM. When the concentration was increased further, the cellulase solution became positively charged and the enzymatic hydrolysis of Avicel decreased rapidly. With the increasing alkyl chain length, C_nTAB provided more proton and neutralized the negative charge of cellulase more obviously. Therefore, the required concentration of C_nTAB could be less to enhance the enzymatic hydrolysis of Avicel. In addition, C₁₆TAB could enhance enzymatic hydrolysis efficiency of corncob at high solid content from 35.0 to 56.3 %; C₁₆TAB could reduce about 60 % of the cellulase loading in the enzymatic hydrolysis of corncob to obtain the same glucose yield. Effect of C₁₆TAB on the enzymatic hydrolysis of typical pretreated softwood and hardwood was also investigated. This study laid the foundation for using C_nTAB to recover cellulase, and provided the design direction for cellulase with higher activity and better stability by adjusting its hydrophilicity and chargeability.     

聚羟基丁酸酯/碳纳米管复合纳米纤维膜的制备及其对重金属离子吸附分离性能的研究

以聚羟基丁酸酯和碳纳米管为原料,采用三氯甲烷/二甲基甲酰胺混合溶液为溶剂,利用静电纺丝技术制备了聚羟基丁酸酯/碳纳米管复合纳米纤维膜.研究了碳纳米管的含量对纳米纤维膜形貌和力学性能的影响,探讨了复合纳米纤维膜对重金属Cu(II)、Cd(II)和Pb(II)的吸附特性.实验结果表明:加入1 wt%碳纳米管能够将纳米纤维的平均直径从(728±146)nm降低至(468±89)nm,纳米纤维膜的比表面积从27.24 m~2/g提高至43.45 m~2/g;碳纳米管的复合能够有效增强聚羟基丁酸酯纳米纤维,当碳纳米管含量1 wt%为最佳,拉伸强度可达5.85 MPa,较纯聚羟基丁酸酯纳米纤维提升了115%.复合纳米纤维膜对重金属离子具有良好的吸附特性,其对Cu(II)、Cd(II)和Pb(II)的最佳吸附pH值为5,此时最大吸附容量分别为91.04、171.05和197.03mg/g,平衡吸附时间分别约为50、60和60 min,吸附率分别为1.79、2.83和3.28 mg/g/min;热力学和动力学分析表明,复合纳米纤维膜对重金属Cu(II)、Cd(II)和Pb(II)的吸附行为更符合Freundlich模型,吸附过程更符合Pseudo-second order模型;循环使用实验表明,重复使用5次后,其吸附容量可保持在初始值的87%以上,具有较好的使用寿命.     

双分布聚乙二醇接枝纳米二氧化硅的高效可控制备

在混合溶剂中通过"grafting to"的方法将2种分子量不同的聚乙二醇单甲醚(MPEG M_w=750,4000)接枝到氨基修饰的St?ber法二氧化硅(SiO_2-NH_2)表面,制备双分布纳米接枝复合物.采用二步法,先将带环氧端基的低分子量聚乙二醇单甲醚(MPEG-EO)与SiO_2-NH_2在甲苯溶剂中充分反应后,与高分子量的MPEG-EO在甲苯和正癸烷的混合溶剂中使用相同的反应条件和后处理方法,能便捷制备出具有双分布接枝的纳米复合物.在接枝反应体系中,分子链的链段尺寸和接枝密度之间存在着密切关系.一定的范围内,接枝密度随链段尺寸减小而增大.通过改变混合溶剂比例来调控接枝链段的尺寸,可以很好控制聚合物的接枝密度.在双分布接枝的纳米复合物中,低分子量的接枝密度为0.85 chains/nm~2,高分子量的接枝密度能达到0.40 chains/nm~2,体现出了简单、高效、可控的特点,与聚环氧乙烷(PEO)共混后分散良好,对于制备出均匀分散的纳米复合材料起到了一定的指导作用.     

波长校准用低压石英汞灯驱动电源的研制

研制波长校准用低压石英汞灯电源,用于驱动汞灯起辉并维持稳态发光。电路由EMI滤波电路、桥式整流电路、LCC半桥谐振逆变电路、控制电路和保护电路5部分组成。采用系统建模与仿真验证电路的可行性并计算电路参数理论值,利用示波器和功率表验证电源输出参数,功率输出稳定性不大于0.03 W。根据紫外可见近红外分光光度计国防最高计量标准对研制的电源驱动汞灯的工作效果进行评价。结果表明,汞灯能够输出系列特征谱线,谱线相对强度稳定性不大于5.16%;汞灯工作3 h后,灯管外壳表面温度为43℃。该驱动电源的性能参数满足JJG112–2015《低压石英汞灯波长标准器检定规程》的要求。